A Closer Look.
60 Foot Sports Light Pole – Stralos Series – High Mast Stadium Lighting Pole – 90MPH - 120 MPH Wind Rated (VULT) – Soccer & Football Field Ready
OVERSIZE FREIGHT ITEM: These poles do not qualify for free shipping. Please contact us for a project-specific freight quote.
Engineering & Structural Documents
Review the supporting engineering documentation for this 60 ft sports light pole using the links below:
12-Page Structural Analysis – Includes structural calculations, design criteria, wind and ice loading, pole capacity, base reactions, deflection, and overall structural rating.
Structural Drawings Package 12 Fixtures – Includes the general assembly drawing, detailed pole dimensions, crossarm configuration, base plate details, and anchor bolt cage drawing.
Structural Drawings Package 8 Fixtures – Includes the general assembly drawing, detailed pole dimensions, crossarm configuration, base plate details, and anchor bolt cage drawing.
Wind Loading & Dimensional Data – Includes wind-speed ratings, maximum EPA, allowable weight, utilization rates, and related dimensional/load information.
Note: Pole engineering can vary by project based on location, required wind speed, mounting configuration, number and type of fixtures, EPA, and other site-specific requirements.
60FT POLE ENGINEERING HIGHLIGHTS
The engineering configuration shown for this 60-foot pole includes:
Pole Height: 60 ft Structure: Tapered Steel Monopole Construction: 18-Sided Tapered Pole Structural Sections: 2 Steel Grade: A572 Grade 65 Design Standard: TIA-222-H Basic Wind Speed: 120 MPH Exposure Category: C Risk Category: II Topographic Category: 1 Nominal Ice Thickness: 0.75 in Wind Speed with Ice: 40 MPH Service Deflection Wind: 60 MPH Analysis Method: Non-Linear P-Delta Analysis Maximum Structural Rating: 87.5% – PASS
HEAVY-DUTY TAPERED CONSTRUCTION
The pole uses a two-section tapered design engineered to handle the significant bending forces generated by high-mounted sports lighting equipment.
The upper section tapers from approximately 10.08" to 6.77" , while the lower section tapers from approximately 14.92" to 9.51" . The lower pole section uses heavier wall construction to accommodate the increased structural loads near the base.
ENGINEERED BASE & ANCHOR SYSTEM
The analyzed configuration uses a heavy-duty base plate and anchor bolt system designed to transfer the pole's wind and lighting loads into the foundation.
Base Plate Thickness: 1.38" Anchor Bolts: 8 Anchor Bolt Diameter: 1.25" Anchor Bolt Grade: F1554-55 Anchor Embedment: 42" Bolt Circle Diameter: Approx. 19.29" Specified Concrete Strength: 4,000 PSI
The engineering analysis calculates a maximum overturning moment of approximately 140.87 kip-ft and maximum horizontal reaction of approximately 3.24 kip for the analyzed configuration.
STRUCTURALLY ANALYZED FOR WIND & ICE
The pole engineering evaluates multiple structural conditions, including:
120 MPH design wind
Wind at 0°, 45° and 90°
Dead load
Wind with ice accumulation
Temperature effects
Service wind conditions
Axial, bending and shear forces
Base reactions
Pole deflection
Base plate capacity
Anchor bolt loading
Combined structural stresses
The analyzed configuration achieved an overall structural rating of 87.5% and PASS status .
ENGINEERED FOR SPORTS & STADIUM LIGHTING
Ideal for:
Soccer Fields
Football Fields
Baseball & Softball Fields
Stadiums
Athletic Complexes
School & University Fields
Municipal Sports Facilities
Large Outdoor Areas
Multiple pole layouts and fixture configurations are available. Systems can be designed using 4, 6, 8 or more poles depending on field dimensions, target foot-candle levels, fixture output, mounting height, seating/stands, wind requirements, and other site conditions.
Contact us for a custom lighting layout and pole configuration for your project, all backed by rock-solid 5 year warranty.
BUILT TO ORDER FOR YOUR PROJECT
Sports lighting poles should be selected and engineered around the actual installation. Requirements can vary based on project location, local wind speed, pole height, fixture quantity, fixture EPA/projected area, mounting configuration, crossbeam design, ice conditions, field dimensions, and target illumination levels .
The engineering information shown above represents the analyzed 60-foot / 120 MPH configuration. Your project requirements and final engineering may differ depending on the installation location and lighting configuration.
Contact us with your project details for assistance selecting the correct pole, mounting system, stadium fixtures, and lighting layout.
About RuggedGrade
Rugged Grade Lighting is a California, USA owned and operated commercial lighting manufacturer. All of our sales and support is based in the USA and unlike others, we will be here for the long term. We are committed to designing only premium LED products and backing them up with better support and service.Our motto is Industrial Grade Solutions because our lights are built better and last longer.
Designed in the USA. Copyright 2012-2026
Before Choosing This Fixture
Use SKU 72-247 when confirming the configuration. Check the published voltage and mounting interface, identify separately ordered accessories, and confirm availability before planning installation.