Dual Bullhorn Mount | Wall Mount, Dual Tenon Adapter, 2 Light Pole Adapter for Slip Fit, Dark Bronze/Brown

Wall Mount - Bullhorn - Dual Tenon Adapter - 2 Light Bullhorn Light Pole Adapter for Slip Fit (Tenon 2 3/8 inch round) - Dark Bronze/Brown Housing

LARGE SIZE - 78-235 is 15 inch center to center and can hold any lights up to 15.5 inches wide with both facing forward. This includes all NextGen, all Revati, all Kivo, all Neptune. Icon are 18 inches and need to be off angle 30 degrees to fit. Stadium pro 500w is 20" and needs to be angled sideways about 40 degrees to fit.(less than 10" deep, so rotating to the sides allows them to fit)

DUAL TENON - Covert single tenon to dual tenon

BLACK COLOR - Housing is black

HEAVY DUTY - Heavy duty aluminum design with double strength welds ensure the bracket lasts the test of time. Protective paint ensures finish. Does not include hardware. Please ensure you are purchasing bolts strong enough to secure a heavy bracket and heavy light.

LARGE INDUSTRIAL SIZE - Built to stand up to decades of us. (hardware is not included. You must purchase hardware as needed for your setup)

SLIP FIT CONVENIENCE - Designed to fit any of our slip fit parking lot lights. By going with slip fit mounts you have full adjustability. Side to side and up and down adjustments. Comes with mounting hardware.

EASY INSTALL Bracket is easy to install. Run the wiring through and secure to pole (hardware not included). Wire the light and then slide the light over the adapter. Rotate the light where you need it and secure the slip fit do the bracket. Adjust the light both up and down and then tighten down. Double check all bolts and perform a safety check.

QUALITY AND WARRANTY High quality design is backed by our 5 Year Warranty.

Heavy Duty Light Bracket Series Wall and Post light adapters Our adapter series allows you to complete your lighting project with ease! Whether you are needing different adapters for your light pole, or wanting to mount a slip fit light to a wall, we have what you need. It is made of thick steel with double-reinforced weld joints. It is a single tenon configuration for slip-fitting units. This wall mount bracket is suitable as part of a commercial or industrial lighting solution. RAB MAB RAB MCB Styled fixture. Rated for indoor or outdoor use.

Heavy Duty Steel Construction

Large Size

EPA - The epa rating for this light is 1.1

MAX LOAD - This bullhorn has a max load of 176lbs (88lbs per tenon)

Extra Strength Welds

Minimalist Design works in any area

2 inch tube allows for slip fits to slide over

Warranty 5 Years

Rugged Grade LED products. Industrial Grade solutions Designed in the USA. Copyright 2012-2025