A Closer Look.
Kono Series - Battery Backup - 15 watt - 90 minutes - Ideal for adding to Linear High Bay, Strip Lights or other fixtures - Drives LED loads at 15W (nominal) for a minimum of 90 minutes
Download Specsheet: 15W Kono Series Battery Backup Driver
*NOTE: Will not work with 80 watt and higher Durado III Semi-Cutoff or Tucana II Full-Cutoff Wall Packs*
Meets FCC Part 15 (Class B) consumer limits
Short circuit overload and open load protection
Suitable for dry and damp locations
Evaluated to UL 924 standards
Operating temperature: 0 C/32 F to 50 C/122 F
Listed for field or factory installation: UL 924 and CSA C22.2
no. 141 emergency lighting compliant
Input frequency: 50/60 Hz
Test switch/Charging indicator light
Battery pack with quick connect: Li-Ion
Battery capacity: 2000mAh
Not suitable for install inside fixture enclosure.
Temperature dependent: The operating temperature should not exceed 50 C/122 F.
ELECTRICAL SPECIFICATIONS
INPUT CHARACTERISTICS OUTPUT CHARACTERISTICS
Family Input Voltage Power Factor Max. Current Max. Output Power Rated Output Current Output Voltage
5W 120 277Vac =0.5 0.051A @ 120V 5W 250mA 100mA 20~54Vdc
Before Choosing This Fixture
Use SKU 79-174 when confirming the configuration. Check the published voltage and mounting interface, identify separately ordered accessories, and confirm availability before planning installation.